+86-20-86215789 service@adhesive-dy.com
English
| Quantity: | |
|---|---|
Product Advantage
Features
1.Non-corrosive, Low-Odor, High Abrasion Resistance
This ensures material integrity, a pleasant workspace, and sustained performance in high-wear scenarios.
2.One-Component, Moisture-Curing
It simplifies installation straight from the cartridge and hardens upon contact with atmospheric humidity.
3.Strong Adhesion to Common Building Materials
The product bonds reliably to substrates like glass, aluminum, and plastic without requiring a primer.
4.Stable Across Extreme Temperatures (-40°C to +150°C)
It maintains elasticity and sealing function without becoming brittle or softening in harsh climates.
5.Neutral Cure for a Impermeable Moisture Barrier
This formulation prevents corrosion on sensitive surfaces and guarantees long-lasting protection against water damage.
Technical Parameters
Test Items | Technical Indicators GB/T 14683-2017 |
Results |
Remarks | |
Appearance |
Appearance:Fine uniform paste,no bubbles,no caking.No gel,no crust,no undispersed precipitates |
Appearance:Fine uniform paste,no bubbles,no caking.No gel,no crust,no undispersed precipitates |
Qualified | |
Extrusion(ml/min)s |
≧80 |
430/min | Qualified | |
Surface Dry Time/h |
≦3 |
0.5 | Qualified | |
Hardness |
20-60 |
40 | Qualified | |
Mass Loss Rate |
|
6.2 | Qualified | |
Sag | Vertical Placement/mm |
≦3 |
0 | Qualified |
Horizontal Placement |
Not deformed |
Not deformed | Qualified | |
23℃ Tensile Modulus |
Tensile Strength/Mpa |
﹥0.4 |
0.82 |
Qualified |
Destruction Area% |
≦5 |
0 | Qualified | |
Stretching Adhesion | Bonding Destruction Area%% |
No damage |
No damage | Qualified |
Product Uses
Application:
Used for caulking and sealing for general window and door installation.
Suitable for adhesive sealing of non-structural building materials such as glass, aluminum, ceramics, concrete, masonry, and so on.
Caulking and sealing between common building materials.
Product Operate Guide
Step 1: Make sure compatibility and adhesion between sealants and adhesive material before using.
Step 2: The sealant displays excellent adhesive effect in the clean environment with temperature of 4℃-40℃and Relative Humidity(RH)of40%-80%.
Step 3:Surface cleaning for bond substrates, clean up the dirt, grease and other contaminants, then affixedtemporary protective tape.
Step 4: According to the size you want, cut out sealant mouth.
Diameter of Gun nozzle should be smaller than the thickness ofthe sealant injection place, it makesnozzle can stretch into the 1/2 depth of the sealant injection place. Start to inject sealant whensubstrate surface is completely dry, Extrusion and injection of sealant shall be continuous ,whichmakes sure the extrusion of sealant is continuous and uniform cylinder, the move the gun slowly anduniformly, make sure the substrate interface is full of silicone sealant. Quick move is not allowed forthe gun, it will cases bubbles or holes.
Step 5: Decoration should be carried out when the injection is finished, and remove temporary protective tape.
1.Surface Cleaning
2.Affixed Tape
3.Sealant Mouth Cutting
4.Injection
5.Surface Fixing
6.Tape Remove
7.Finish
FAQ
≦8
