+86-20-86215789 service@adhesive-dy.com
English
| Quantity: | |
|---|---|
Product Advantage
Key Advantages of our product:
1.Superior All-Weather Resistance & Long-Term Durability
2.Extremely long service life.It exhibits minimal shrinkage and maintains exceptional elasticity, ensuring a watertight and airtight seal that protects your building for over 15 years.
3.Bonds to most materials without priming
4.With a remarkable ±25% joint movement capability, our sealant effectively absorbs the thermal expansion and contraction of building material. prevents cracking and adhesive failure, guaranteeing a reliable, long-lasting seal even in dynamic facades
5.Accelerated Curing & Enhanced Productivity
We understand that time is money on a construction site. Our advanced formula features a rapid skin-forming time (approximately 15-20 minutes) and a faster through-cure compared to standard products. This allows for quicker joint tooling and earlier exposure to the elements, accelerating project timelines without compromising the long-term performance or quality of the seal.
Technical Parameters
Test Items | Technical Indicators GB/T 14683-2017 |
Results |
Remarks | |
Appearance |
Appearance:Fine uniform paste,no bubbles,no caking.No gel,no crust,no undispersed precipitates |
Appearance:Fine uniform paste,no bubbles,no caking.No gel,no crust,no undispersed precipitates |
Qualified | |
Extrusion(ml/min)s |
≧80 |
430/min | Qualified | |
Surface Dry Time/h |
≦3 |
0.7 | Qualified | |
Hardness |
20-60 |
42 | Qualified | |
Elongation At Break |
|
280% | Qualified | |
Elastic Response Rate |
≧80% |
96 | Qualified | |
Mass Loss Rate |
≦10 |
2.7 | Qualified | |
Sag | Vertical Placement/mm |
≦3 |
0 | Qualified |
Horizontal Placement |
Not deformed |
Not deformed | Qualified | |
23℃ Tensile Modulus |
Tensile Strength/Mpa |
﹥0.4 |
1..16 |
Qualified |
Destruction Area% |
≦5 |
0 | Qualified | |
Stretching Adhesion | Bonding Destruction Area%% |
No damage |
No damage | Qualified |
Product Uses
Here are four specific application scenarios of Silicone Sealants:
1.General filling and caulking applications.
2.Windows and doors perimeter sealing and waterproofing.
3.Suitable for filling and sealing of most building materials, such as weather-resistant sealing of various metal aluminum plate curtain walls, glass curtain walls, aluminum plates, stone weather-resistant canopies, color steel tiles, high-end doors and windows, small exposed framing glass curtain wall structures, etc.
Product Operate Guide
Step 1: Make sure compatibility and adhesion between sealants and adhesive material before using.
Step 2: The sealant displays excellent adhesive effect in the clean environment with temperature of 4℃-40℃and Relative Humidity(RH)of40%-80%.
Step 3:Surface cleaning for bond substrates, clean up the dirt, grease and other contaminants, then affixedtemporary protective tape.
Step 4: According to the size you want, cut out sealant mouth.
Diameter of Gun nozzle should be smaller than the thickness ofthe sealant injection place, it makesnozzle can stretch into the 1/2 depth of the sealant injection place. Start to inject sealant whensubstrate surface is completely dry, Extrusion and injection of sealant shall be continuous ,whichmakes sure the extrusion of sealant is continuous and uniform cylinder, the move the gun slowly anduniformly, make sure the substrate interface is full of silicone sealant. Quick move is not allowed forthe gun, it will cases bubbles or holes.
Step 5: Decoration should be carried out when the injection is finished, and remove temporary protective tape.
1.Surface Cleaning
2.Affixed Tape
3.Sealant Mouth Cutting
4.Injection
5.Surface Fixing
6.Tape Remove
7.Finish
FAQ
/
